7.0 "
(17.78 cm diagonal) TFT active
matrix LC-display in color:
Resolution
subpixel : 2400X480 (1,152,000
subpixel)
Resolution RGB pixel : 800X480
(384,000 RGB pixel; in the comparison
PAL 414,720)
Very
high resolution on smalest area!
This display has the highest solution
of all 7" TFT-panels. Standard
displays in 7" have 1440X234
subpixel resolution (480X234 RGB
pixel).
It
concerns herewith a professional
display, this is no beginner display!
Very
simple disassembly, clearly improves
comparable products (Lilliput).
No special tool is required. Disassembly
by means of the instructions in
approx. 5 min.
Incl.
high performances driverboard
(controller) and IR-remote control.
Input
(altogether 3X, switchable over
remote control) :
2 x separate video entrances over
chinch (DVD, Sat, Playstation)
1 x VGA entrance for the PC connection
No
expensive additional Linedoubler
needed (approx. 99,- EUR)!
Because the controller is very
efficiently constructed, PC solutions
can be issued until maximally
to 1280X1024 pixel (interpolated).
Further
data:
- PAL/NTSC standard (SECAM is
not supported)
- 400 nits translucences !
- 200:1 contrast !
- 30 ms response time !
- 12 V input - 1000 mA
- Widescreen format
- over OnScreen display adjustable
(AV1/2 and VGA)
- operating temperature 0°
- 50°C
- including cable connection AV/VGA
with 12 V
- including 1.8 m VGA extension
cable ! (approx. 10.- EUR)
- incl. 4.8 m video cable ! (approx.
7.- EUR)
- infrared microremote
control for OnScreen functions
The
display has softtouch keys - these
can be used directly at the DIY-projector
case.
Infrared
sensor (for remote control ) can
be extended built at any part
of the case.
Further:
the frame of the display further
can be used, to the yet easier
reinforcement in the DIY-projector.
Obviously
we hold some detailed instructions
on the server how the display
is disassemblied.
This
display is suitable for a pro
version of DIY-projector.
Display
+ driver board are delivered in
the plastic housing.
The set can be built in the car,
as DVD screen.
-
Quality : TFT Panel MADE IN JAPAN
by HITACHI!
-
Quality: Driverboard MADE IN TAIWAN,
better than a Lilliput (China)
-
Why do many dealers give the statement
"1440x234 RGB pixel in TFT
models" on?
Because
they do not want to know it or
want to conceal the customer:
Each display with this resolution
must be divided to get the RGB
resolution.
Example: 480X234 pixel, the statement
"1440" must be divided
through factor "3" (stands
for the base colors Red-Green-Blue).
This display has a special characteristic:
At the movies in 16: 9 format
(which do not come directly from
a DVD player - as example DivX
or TV-transmitter) the black edges
can be manually erased - through
this way the most panel surface
is used for the movie, not for
black widescreen stripes - it
receives the full DVD resolution
!
(PAL 4:3 = 720X576 pixel, Widescreen
VGA = 800x480; extended picture
without black edges).
|
|
|
Special
function: erases black borders
! Get the full DVD resolution
! |
Owners
of the NVIDIA graphic cards can
regulate the KEYSTONE over the
drivers! Therewith projections
are possible out of certain angles!
Not
each TFT display cannot be used
for the project:
Many
displays must be separated laboriously
by the electronics by soldering.
At the same time dangerous temperatures
can destroy the sensitive display
electronics.
Many
favorable displays have conduct
gum connections between the panel
and the electronics - if they
are removed, is the display no
longer operational.
Many
displays have soldered data connections.
We get support inquiries whether
such displays can be used generally.
We dissuade therefrom. Transmission
errors from panel to the controller
are to be expected here to 95%
of the cases (see pictures).
Photos
from one inquiry:
cheap displays are very often
found with fixed connection
-
No possibility for usage !
Bought - and the customer cannot
use it!
This
display is tested for the DIY-projector
!
In
comparison with other 7"
TFTs this one is very easily
disassemblied. Already after
few minutes ready for use for
the DIY-projector !
After 5 min, you have following
in the hand: glasspanel incl.
frame and the driver board -
you do not need more. All cables
are included.
Suitable
power supplies: 12V 1000mA
Why buying Lilliput ?
- you do not need touchscreen
for your DIY projector
- you do not need small audio
system
- be aware of famous "Jurrasic
Park" logos (burn-in effect)
- get here the black border
erasing function
- be aware of Lilliput controllers
- if you damage your display
through disassembliation, you
can wait few years for new spare
parts - we have all spare parts
(must be a registred customer
to get the hidden links in our
shop)
For
further pictures of the display
please click here !
Download
here a description and disassembly
instructions
as a file (960 KB)
Notice:
for stand alone purpose please
use only power supplies with
1000 mA (see
here), because this monitor
has a build in high quality
Hitachi inverter. For DIY-projector
purpose only you can use a 300
mA power supply.
Connection:
directy on 12V (red +, black
-, purple has no function)
